Beverage Air SPE72HC-10C 72″ Sandwich/Salad Prep Table w/ Refrigerated Base, 115v

$5,139.38

  • Part of the Elite Series
  • 21.5-cu.-ft. interior space
  • Aluminum-lined interior with a stainless steel exterior
  • 3 self-closing doors with aluminum handles
  • Doors have magnetic gaskets
  • Doors can remain open past 120 degrees
  • (4) 6-in. casters with locks on 2
  • 6 epoxy-coated steel wire shelves
  • 10 polycarbonate sixth-size food pans that measure 4 inches deep
  • Removable, 17-in.-wide polyethylene cutting board
  • R290 hydrocarbon refrigerant
  • Non-electric, automatic evaporator
  • Evaporator coil is epoxy coated so that it will not rust
  • Can be serviced from the rear
  • 1,549 BTU

Plant Based Pros is an Authorized Retailer of Beverage Air products.
Items purchased from Plant Based Pros are:

  • Brand new and in original packaging.
  • Covered by the full manufacturer warranty.
  • Qualified for manufacturer service and support.
  • Questions? Call (800) 522-0517
SKU: BeverageAirSPE72HC-10C Category:

Description

Beverage Air SPE72HC-10C

The Beverage Air SPE72HC-10C Elite Series salad/sandwich prep table has a stainless steel exterior and an aluminum-lined interior that resists corrosion and scratches. Its three self-closing doors can stay open beyond 120 degrees for complete access to the refrigerated base. Each door has an aluminum handle and magnetic gaskets that trap cold air. Six epoxy-coated wire shelves store products in the cabinet area, and 10 sixth-size, 4-inch-deep food pans are included in the top food pan storage area. The Beverage Air SPE72HC-10C prep table has a 17-inch-wide polyethylene cutting board that provides a space for crafting meals and can be removed for cleaning. Four 6-inch casters move the table, and two of them have brakes to secure the table in place.

Product Details

  • Part of the Elite Series
  • 21.5-cu.-ft. interior space
  • Aluminum-lined interior with a stainless steel exterior
  • 3 self-closing doors with aluminum handles
  • Doors have magnetic gaskets
  • Doors can remain open past 120 degrees
  • (4) 6-in. casters with locks on 2
  • 6 epoxy-coated steel wire shelves
  • 10 polycarbonate sixth-size food pans that measure 4 inches deep
  • Removable, 17-in.-wide polyethylene cutting board
  • R290 hydrocarbon refrigerant
  • Non-electric, automatic evaporator
  • Evaporator coil is epoxy coated so that it will not rust
  • Can be serviced from the rear
  • 1,549 BTU

Dimensions and Utilities

  • Door opening: 191/2 in. W x 215/8 in. H
  • Interior: 68 in. W x 233/8 in. D x 23 in. H
  • Overall: 72 in. W x 383/8 in. D x 45 in. H
  • 5.4 A, 1/3 HP
  • 115 V/60 Hz/1 ph, 8-ft. cord with a NEMA 5-15P plug

Elite Series Sandwich Top Refrigerated Counter, three-section, 72″W, 21.5 cu. ft. capacity, (3) doors, stainless steel top with opening for (10) 1/6 size pans, 17″ cutting board & available counter space, (6) shelves, stainless steel exterior top, front, sides & doors, galvanized steel exterior bottom and back, aluminum interior, rear-mounted self-contained refrigeration, (pans furnished are 4″ deep, tops will accommodate 6″ deep pans), R290 Hydrocarbon refrigerant, 1/3 HP, UL, cULus, UL EPH Classified, UL-Sanitation, MADE IN USA

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.

Documents:

Additional information

Delivery Options

Commercial No Lift Gate, Commercial Lift Gate, Residential Lift Gate

Reviews

There are no reviews yet.

Be the first to review “Beverage Air SPE72HC-10C 72″ Sandwich/Salad Prep Table w/ Refrigerated Base, 115v”

Your email address will not be published. Required fields are marked *