Beverage Air BB68HC-1-S 69″ Bar Refrigerator – 2 Swinging Solid Doors, Stainless, 115v

$3,984.12$4,184.12

  • 2-section cooler with reach-in design
  • 2 locking solid doors
  • Temperature holding range: 36-38 degrees F
  • 25.93-cu.-ft. interior space
  • Stainless silver
  • Stainless steel top and exterior with galvanized steel interior
  • Manually controlled LED lights brighten the inside of the unit
  • Door gaskets are magnetic for tight seal
  • Doors can self-close or remain open
  • Forced-air cooling
  • 4 adjustable steel shelves are each coated with epoxy
  • Accommodates (3) 1/2-barrel kegs
  • Self-contained compressor is located on the left
  • Automatic defrost prevents ice buildup
  • Suitable for packaged food products only
  • R290 hydrocarbon refrigerant
  • 2,392-BTU heat transfer capacity
Clear
SKU: BeverageAirBB68HC-1-S Category:

Description

Beverage Air BB68HC-1-S Description

Solid doors on the Beverage Air BB68HC-1-S bar back refrigerator provide insulated protection from hot temperatures and shield the contents of the cooler from light, preserving the freshness and integrity of supplies. After they’re opened, the doors can self-close to conserve energy, and magnetic gaskets seal them firmly to ensure no air leaks out. The doors can also remain open to streamline cleaning, restocking, or maintenance procedures. Since this unit’s compressor is self-contained and left mounted, it doesn’t require any modifications to install and operate and takes up reduced floor space when compared to a unit with a remote compressor.

The Beverage Air BB68HC-1-S back bar refrigerator gives users 25.93 cubic feet of cold storage space, providing room to keep cold supplies such as beer, tomato juice, cream, and kahl‚àö‚à´a near the service area. It’s made of stainless and galvanized steel to endure heavy use in a high-traffic environments and can accommodate three half-barrel kegs at one time. To customize storage space, users can adjust the four epoxy-coated steel shelves within the refrigerator to fit almost any configuration of products.

Product Details

  • 2-section cooler with reach-in design
  • 2 locking solid doors
  • Temperature holding range: 36-38 degrees F
  • 25.93-cu.-ft. interior space
  • Stainless silver
  • Stainless steel top and exterior with galvanized steel interior
  • Manually controlled LED lights brighten the inside of the unit
  • Door gaskets are magnetic for tight seal
  • Doors can self-close or remain open
  • Forced-air cooling
  • 4 adjustable steel shelves are each coated with epoxy
  • Accommodates (3) 1/2-barrel kegs
  • Self-contained compressor is located on the left
  • Automatic defrost prevents ice buildup
  • Suitable for packaged food products only
  • R290 hydrocarbon refrigerant
  • 2,392-BTU heat transfer capacity

Dimensions & Utilities

  • Interior: 561/4 in. W x 23 in. D x 32 in. H
  • Overall: 69 in. W x 291/8 in. D x 371/4 in. H
  • 5.3 A, 1/3 HP
  • 115 V/60 Hz/1 ph, 8-ft. cord with NEMA 5-15 plug

Refrigerated Back Bar Storage Cabinet, two-section, 69″W, 37-1/4″ H, 25.93 cu. ft., (2) solid doors, snap-in door gasket, (4) epoxy coated steel shelves, (3) 1/2 barrel kegs, LED interior lighting with manual on/off switch, stainless steel top & exterior, galvanized interior, left-mounted self-contained refrigeration with storage above, R290 Hydrocarbon refrigerant, 1/3 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USA

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.

Documents:

Additional information

Delivery Options

Commercial No Lift Gate, Commercial Lift Gate, Residential Lift Gate

Reviews

There are no reviews yet.

Be the first to review “Beverage Air BB68HC-1-S 69″ Bar Refrigerator – 2 Swinging Solid Doors, Stainless, 115v”

Your email address will not be published. Required fields are marked *