Beverage Air DD68HC-1-S 69″ Draft Beer System w/ (3) Keg Capacity – (2) Column, Stainless, 115v

$4,454.98$4,654.98

  • Temperature range: 36-38 degrees F
  • Full electronic control
  • Brushed stainless finish
  • 25.93-cu.-ft. capacity
  • Fits 3 full kegs
  • 3 stainless steel dispensing taps on 2 insulated columns
  • 2 solid cabinet doors can be locked to prevent theft
  • Naturally antimicrobial silver lines beverage tubing
  • Durable stainless steel exterior and galvanized interior
  • Door gaskets with magnets
  • Self-closing doors
  • Heavy-duty stainless steel drip tray
  • Floor and door sill are reinforced
  • Drain tube enables connection to floor drain
  • Self-contained refrigeration unit is side mounted
  • Automatic defrost
  • Epoxy-coated evaporator coil resists moisture
  • R290 hydrocarbon refrigerant
  • Heat transfer capacity: 2,392 BTU

Plant Based Pros is an Authorized Retailer of Beverage Air products.
Items purchased from Plant Based Pros are:

  • Brand new and in original packaging.
  • Covered by the full manufacturer warranty.
  • Qualified for manufacturer service and support.
  • Questions? Call (800) 522-0517
Clear
SKU: BeverageAirDD68HC-1-S Category:

Description

Beverage Air DD68HC-1-S

The Beverage Air DD68HC-1-S draft beer dispenser has two locking doors to secure valuable product. Preventing air loss to reduce energy consumption, magnetic gaskets snap into place on each door and ensure an airtight seal. Inside the cabinet, the reinforced floor supports the weight of three full-sized kegs.

The Beverage Air DD68HC-1-S kegerator dispenser has stainless steel taps, cabinet, and top, with a galvanized steel interior to prevent corrosion. Keeping the stored drinks chilled to the desired serving temperature, users can operate the electronic control panel to moderate temperature settings. A built-in drainage tube in the front of the cabinet can be connected to a floor drain for quick disposal of waste.

Product Details

  • Temperature range: 36-38 degrees F
  • Full electronic control
  • Brushed stainless finish
  • 25.93-cu.-ft. capacity
  • Fits 3 full kegs
  • 3 stainless steel dispensing taps on 2 insulated columns
  • 2 solid cabinet doors can be locked to prevent theft
  • Naturally antimicrobial silver lines beverage tubing
  • Durable stainless steel exterior and galvanized interior
  • Door gaskets with magnets
  • Self-closing doors
  • Heavy-duty stainless steel drip tray
  • Floor and door sill are reinforced
  • Drain tube enables connection to floor drain
  • Self-contained refrigeration unit is side mounted
  • Automatic defrost
  • Epoxy-coated evaporator coil resists moisture
  • R290 hydrocarbon refrigerant
  • Heat transfer capacity: 2,392 BTU

Dimensions & Utilities

  • Interior: 561/8 in. W x 231/8 in. D x 271/4 in. H
  • Overall: 69 in. W x 29 in. D x 521/2 in. H
  • 5.5 A, 1/3 HP
  • 115 V/60 Hz/1 ph, 8-ft. cord with NEMA 5-15 plug

Draft Beer Cooler, 69″ W, 29″ D, 25.93 cu. ft., (2) doors, (3) keg capacity, door locks, (1) single and (1) dual faucet towers, stainless steel top & front, galvanized interior, self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/3 HP, UL, cULus, UL EPH Classified, UL-Sanitation, MADE IN USA, 115v/60/1ph

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.

Documents:

Additional information

Delivery Options

Commercial No Lift Gate, Commercial Lift Gate, Residential Lift Gate

Reviews

There are no reviews yet.

Be the first to review “Beverage Air DD68HC-1-S 69″ Draft Beer System w/ (3) Keg Capacity – (2) Column, Stainless, 115v”

Your email address will not be published. Required fields are marked *