Beverage Air SM58HC-W Milk Cooler w/ Top & Side Access – (1024) Half Pint Carton Capacity, 115v

$3,292.23

  • 22.63-cu.-ft. interior space
  • Single section
  • Fits (16) 13-in. x 13-in. x 11-in. or (10) 19-in. x 13-in. x 11-in. flat-top milk carton cases
  • Temperature holding range: 36-38 degrees F
  • Electronic controls enable adjustment
  • Temperature can be monitored with external thermometer
  • Heavy-duty galvanized steel interior with a stainless steel floor
  • White exterior
  • Automatic defrost eliminates built-up ice
  • Drain in the floor rids cabinet of melted ice
  • Cold-wall evaporator
  • Evaporator coil is epoxy coated to protect it from corroding
  • R290 hydrocarbon refrigerant is an environmentally friendly choice
  • Lids self-latch and stay shut with compression gaskets
  • Locks on lid protect against tampering and theft
  • Safety bumpers prevent damage when unit is rolled
  • Wire floor racks hold milk cases
  • Positioned on 4-in. plate casters, 2 with locks
  • 1,434-BTU heat transfer capacity
SKU: BeverageAirSM58HC-W Category:

Description

Beverage Air SM58HC-W

The Beverage Air SM58HC-W school milk cooler defrosts automatically and eliminates melted ice through its centrally located floor drain. Coated in epoxy, the coil in the cold-wall evaporator doesn’t corrode, and it cools with eco-friendly R290 hydrocarbon refrigerant. Temperatures in the cabinet can be adjusted electronically between 36 and 38 degrees Fahrenheit, and to ensure the levels are accurate, the cooler comes with an external thermometer.

Because the lids on the Beverage Air SM58HC-W milk cooler lock, theft and tampering at any hour is minimized. The lids seal tight with gaskets to help prevent cold air from escaping, ensuring temperatures stay in the ideal range. Its wire floor racks hold milk cases and provide even airflow throughout all stored product. For resilience, the interior is made of galvanized steel with a stainless steel floor.

Product Details

  • 22.63-cu.-ft. interior space
  • Single section
  • Fits (16) 13-in. x 13-in. x 11-in. or (10) 19-in. x 13-in. x 11-in. flat-top milk carton cases
  • Temperature holding range: 36-38 degrees F
  • Electronic controls enable adjustment
  • Temperature can be monitored with external thermometer
  • Heavy-duty galvanized steel interior with a stainless steel floor
  • White exterior
  • Automatic defrost eliminates built-up ice
  • Drain in the floor rids cabinet of melted ice
  • Cold-wall evaporator
  • Evaporator coil is epoxy coated to protect it from corroding
  • R290 hydrocarbon refrigerant is an environmentally friendly choice
  • Lids self-latch and stay shut with compression gaskets
  • Locks on lid protect against tampering and theft
  • Safety bumpers prevent damage when unit is rolled
  • Wire floor racks hold milk cases
  • Positioned on 4-in. plate casters, 2 with locks
  • 1,434-BTU heat transfer capacity

Dimensions & Utilities

  • Interior: 55 in. W x 27 in. D x 253/4 in. H
  • Overall: 58 in. W x 305/8 in. D x 411/8 in. H
  • 2.2 A, 1/3 HP
  • 115 V/60 Hz/1 ph, 8-ft. cord with a NEMA 5-15P plug

School Milk Cooler, cold wall, normal temperature, 58″W x 30-5/8″D x 41-1/8″H, 22.63 cu. ft., single access, flat top carton capacities, (16) 13″ x 13″ x 11″ or (10) 19″ x 13″ x 11″ case capacity, self-latching doors/lids with safety bumpers, cylinder lock, wire floor racks, floor drain, electronic control, auto defrost, galvanized steel interior with stainless steel floor, white exterior, R290 Hydrocarbon refrigerant, 1/3 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USA

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.

Documents:

Reviews

There are no reviews yet.

Be the first to review “Beverage Air SM58HC-W Milk Cooler w/ Top & Side Access – (1024) Half Pint Carton Capacity, 115v”

Your email address will not be published. Required fields are marked *