Beverage Air SPE72HC-10 72″ Sandwich/Salad Prep Table w/ Refrigerated Base, 115v

$4,261.43$4,461.43

  • Part of the Elite Series
  • 21.5-cu.-ft. interior space
  • Exterior is constructed of stainless steel
  • Aluminum-lined interior
  • 10-in.-wide, removable polyethylene cutting board
  • 3 doors are self-closing with magnetic gaskets
  • Doors stay open 120 degrees for loading and have aluminum handles
  • 2 of the (4) 6-in. casters have brakes
  • 10 sixth-size, 4-in.-deep food pans are included
  • 6 epoxy-coated steel wire shelves
  • Serviceable from the back
  • Base temperature range: 36-38 degrees F
  • Automatic, non-electric evaporator
  • Uses R290 hydrocarbon refrigerant
  • Epoxy-coated evaporator coil
  • 1,549 BTU

Plant Based Pros is an Authorized Retailer of Beverage Air products.
Items purchased from Plant Based Pros are:

  • Brand new and in original packaging.
  • Covered by the full manufacturer warranty.
  • Qualified for manufacturer service and support.
  • Questions? Call (800) 522-0517
Clear
SKU: BeverageAirSPE72HC-10 Category:

Description

Beverage Air SPE72HC-10

Since it is made of stainless steel, the Beverage Air SPE72HC-10 Elite Series salad/sandwich prep table resists scratches and dents. Its interior is lined with rust-resistant aluminum, and a removable, 10-inch-wide polyethylene cutting board is fixed to its top. Two of the unit’s four 6-inch casters have locks for safety, and 10 sixth-size, 4-inch-deep food pans are included for the top compartment. The Beverage Air SPE72HC-10 prep table has three self-closing doors that can stay open 120 degrees when employees load food into the cabinet. Each door has aluminum handles and magnetic gaskets that seal cold air inside. Six epoxy-coated steel wire shelves sit in the base.

Product Details

  • Part of the Elite Series
  • 21.5-cu.-ft. interior space
  • Exterior is constructed of stainless steel
  • Aluminum-lined interior
  • 10-in.-wide, removable polyethylene cutting board
  • 3 doors are self-closing with magnetic gaskets
  • Doors stay open 120 degrees for loading and have aluminum handles
  • 2 of the (4) 6-in. casters have brakes
  • 10 sixth-size, 4-in.-deep food pans are included
  • 6 epoxy-coated steel wire shelves
  • Serviceable from the back
  • Base temperature range: 36-38 degrees F
  • Automatic, non-electric evaporator
  • Uses R290 hydrocarbon refrigerant
  • Epoxy-coated evaporator coil
  • 1,549 BTU

Dimensions and Utilities

  • Door opening: 191/2 in. W x 215/8 in. H
  • Interior: 68 in. W x 233/8 in. D x 23 in. H
  • Overall: 72 in. W x 32 in. D x 45 in. H
  • 5.4 A, 1/3 HP
  • 115 V/60 Hz/1 ph, 8-ft. cord with a NEMA 5-15P plug

Elite Series Sandwich Top Refrigerated Counter, three-section, 72″W, 20.02 cu. ft. capacity, (3) doors, stainless steel top with opening for (10) 1/6 size pans, 10″ cutting board & available counter space, (6) shelves, stainless steel exterior top, front, sides & doors, galvanized steel exterior bottom and back, aluminum interior, rear-mounted self-contained refrigeration, (pans furnished are 4″ deep, tops will accommodate 6″ deep pans), R290 Hydrocarbon refrigerant, 1/3 HP, cULus, UL EPH Classified, UL-Sanitation, Made in USA, 115v/60/1ph

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.

Documents:

Additional information

Delivery Options

Commercial No Lift Gate, Commercial Lift Gate, Residential Lift Gate

Reviews

There are no reviews yet.

Be the first to review “Beverage Air SPE72HC-10 72″ Sandwich/Salad Prep Table w/ Refrigerated Base, 115v”

Your email address will not be published. Required fields are marked *