Hatco HWBHRT-7QT 7 qt Drop In Soup Warmer w/ Thermostatic Controls

$442.20

  • 7-qt. capacity
  • Fabricator component only
  • Top-mount unit with drop-in design
  • Can be installed in a 9.13- to 9.56-in.-diameter, non-combustible countertop cutout
  • Fits an 11-in. x 11-in. to 11.25-in. x 11.25-in. cutout in a combustible countertop
  • Includes EZ locking hardware for quick installation
  • Stainless and aluminized steel housing
  • Uninsulated
  • High-watt configuration
  • Metal-sheathed heating element
  • Thermostatic control
  • Lighted on/off rocker switch
  • 36-in.-long lead cords for remote panel installation
  • Control box can be installed in 2.13-in.-wide x 3.38-in.-high cutout
SKU: HatcoHWBHRT-7QT Category:

Description

Hatco HWBHRT-7QT

Because the Hatco HWBHRT-7QT drop-in soup warmer’s metal-sheathed heating element has a correlating thermostatic control, this unit can accommodate prepared soup, stew, chili, sauce, and curry with various holding requirements. Operators can adjust the control dial to preset temperatures, while the thermostat monitors actual product temperatures by raising or lowering heat as necessary. This 2.75-inch-wide by 4-inch-high panel can be installed in a 2.13-inch-wide by 3.38-inch-high cutout, and because it’s attached to 36-inch-long lead cords, it can be positioned at a distance from the warmer.

This Hatco HWBHRT-7QT soup warmer measures 10.31 inches in diameter by 9.60 inches high and accommodates 7 quarts of product. Operators can use the included EZ locking hardware to install this circular unit in a countertop cutout ranging from 9.13 to 9.56 inches in diameter. To match fabricated steam table layouts, it creates a seamless look once dropped into the countertop, while its stainless and aluminized steel housing matches most themes. To preserve its original look, this metal resists corroding, denting, and warping and can be wiped clean.

Product Details

  • 7-qt. capacity
  • Fabricator component only
  • Top-mount unit with drop-in design
  • Can be installed in a 9.13- to 9.56-in.-diameter, non-combustible countertop cutout
  • Fits an 11-in. x 11-in. to 11.25-in. x 11.25-in. cutout in a combustible countertop
  • Includes EZ locking hardware for quick installation
  • Stainless and aluminized steel housing
  • Uninsulated
  • High-watt configuration
  • Metal-sheathed heating element
  • Thermostatic control
  • Lighted on/off rocker switch
  • 36-in.-long lead cords for remote panel installation
  • Control box can be installed in 2.13-in.-wide x 3.38-in.-high cutout

Dimensions & Utilities

  • Thermostatic control: 2.75 in. W x 4 in. H
  • Overall: 10.31 in. dia. x 9.60 in. H
  • 6.7 A, 800 W
  • 120 V/60 Hz/1 ph

From The Manufacturer

(Fabricator component only) Drop-In Heated Well, round, non-insulated, top mounted, 7 quart, thermostatic controls with lit rocker switch & leads, stainless steel construction (high watt), cURus

*Image may not depict product color, inclusions or accessories.

Documents:

Additional information

Voltage

120 V, 208 V / 1 Ph, 240 V / 1 Ph

Reviews

There are no reviews yet.

Be the first to review “Hatco HWBHRT-7QT 7 qt Drop In Soup Warmer w/ Thermostatic Controls”

Your email address will not be published. Required fields are marked *