Traulsen UST6024-LL-SB 60″ Sandwich/Salad Prep Table w/ Refrigerated Base, 115v

$7,080.48

  • Part of the Dealer’s Choice series
  • Stainless steel doors, sides, and top resist dents and scratches
  • Corrosion-resistant, anodized aluminum interior
  • Durable, galvanized steel back and bottom
  • (6) 4-in. casters
  • 2-in.-thick polyurethane insulation
  • Flat pan lid saves space
  • Cutout holds 24 sixth-size pans
  • 8-in.-deep nylon cutting board is reversible to double the lifespan
  • Left-hinged, self-closing doors stay closed
  • Doors stay open at a 105-degree angle
  • Snap-out, EZ-clean door gaskets
  • 4 powder-coated wire shelves are adjustable in 1/2-in. increments
  • Internal thermometer
  • Temperature holding range: 34-38 degrees F
  • Capillary tubes regulate refrigerant flow
  • R450A refrigerant is eco-friendly and nonflammable
  • Front-breathing refrigeration system does not require side clearances
SKU: TraulsenUST6024-LL-SB Category:

Description

Traulsen UST6024-LL-SB Description

In its top cutout, the Traulsen UST6024-LL-SB Dealer’s Choice prep table can hold 24 different ingredients in separate pans. Although it comes with 4-inch-deep, sixth-size pans, it is also compatible with 6-inch-deep pans. The pans are held upright, and when not in use, operators can lower the lid to preserve food. On the front, an 8-inch-deep nylon cutting board provides a space for plating foods. This board is removable for cleaning and reversible, practically doubling its lifespan.

Refrigerated storage in the base provides room for additional ingredients and supplies. This Traulsen UST6024-LL-SB prep table has two storage sections, each with two adjustable wire shelves. To accommodate various items, the shelves move up and down in 1/2-inch increments, and the floor is made of anodized aluminum, which resists corrosion. The walls are filled with polyurethane insulation for cold-air retention, and gaskets seal the doors shut, preventing leaks. Adjustable from 34 to 38 degrees Fahrenheit, the internal temperature can be set by the user and monitored with the internally mounted thermometer.

Product Details

  • Part of the Dealer’s Choice series
  • Stainless steel doors, sides, and top resist dents and scratches
  • Corrosion-resistant, anodized aluminum interior
  • Durable, galvanized steel back and bottom
  • (6) 4-in. casters
  • 2-in.-thick polyurethane insulation
  • Flat pan lid saves space
  • Cutout holds 24 sixth-size pans
  • 8-in.-deep nylon cutting board is reversible to double the lifespan
  • Left-hinged, self-closing doors stay closed
  • Doors stay open at a 105-degree angle
  • Snap-out, EZ-clean door gaskets
  • 4 powder-coated wire shelves are adjustable in 1/2-in. increments
  • Internal thermometer
  • Temperature holding range: 34-38 degrees F
  • Capillary tubes regulate refrigerant flow
  • R450A refrigerant is eco-friendly and nonflammable
  • Front-breathing refrigeration system does not require side clearances

Dimensions & Utilities

  • 60 in. W x 341/2 in. D x 36 in. H (571/2-in. H with lid open)
  • 7.5 A, 1/4 HP
  • 115 V/60 Hz/1 ph, 8-ft. cord with a NEMA 5-15P plug

Dealer’s Choice Compact Prep Table Refrigerator with low-profile flat lid, Reach-in, two-section, 60″ wide, holds (24) 1/6 pans 4″ deep (included), can accommodate up to 6″ deep pans, full length white reversible cutting board, (2) stainless steel doors with Santoprene EZ-Clean Gasket, both hinged left, stainless steel top, sides & back, galvanized bottom, anodized aluminum interior with (4) shelves, rear mounted, self-contained refrigeration, (6) 4″ casters, 1/4 HP, cETLus, NSF

Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.

Documents:

Reviews

There are no reviews yet.

Be the first to review “Traulsen UST6024-LL-SB 60″ Sandwich/Salad Prep Table w/ Refrigerated Base, 115v”

Your email address will not be published. Required fields are marked *