The Beverage Air SPED60HC-12C-4 prep table has a durable exterior constructed of stainless steel, as well as a galvanized steel back and bottom. The interior is lined with aluminum to resist corrosion. Its stainless steel hood and lid assembly sits over the countertop cutout to cover 12 sixth-size pans. It also features a removable cutting board made of polyethylene.
Additional storage is provided by four drawers. They have durable stainless steel frames that are supported by telescoping slides. Since these slides lock, there is no need to worry about accidentally pulling the drawers out of the cabinet. Casters make the unit easy to transport, and since two casters lock, the unit stays in place.
The Beverage Air SPED60HC-12C-4 prep table uses forced air to circulate through the cabinet, providing even, cold temperatures. An epoxy coating on the evaporator coil resists corrosion. R290 hydrocarbon refrigerant keeps temperatures cool.
- Top, sides, grille, and front are made of strong, easy-to-clean stainless steel
- Galvanized steel back and bottom construction is durable
- Aluminum interior resists corrosion
- Toppings in the top cutout are protected by a stainless steel hood and lid assembly
- 12 sixth-size polycarbonate pans hold toppings for pizza, salads, and sandwiches
- Sturdy polyethylene cutting board is removable for cleaning
- Easy to move with 6-in. casters
- 2 casters with brakes keep the cabinet stationary
- 1,549 BTU
- 115 V/60 Hz/1 ph, 3 A, 1/4 HP, 8-ft. cord with NEMA 5-15P plug
- Interior Dimensions: 56 in. W x 153/8 in. D x 23 in. H
- Overall Dimensions: 60 in. W x 387/8 in. D x 45 in. H
Rear-Mount Refrigeration System
- Evaporator recirculates air under pans, evenly cooling products
- Environmentally friendly R290 refrigerant maintains cool temperatures
- Epoxy coating on evaporator coil resists corrosion
- System can be easily accessed from the rear for service
4 Pull-Out Drawers
- Rugged stainless steel frames are supported by telescoping slides
- Locking mechanism prevents the drawers from being pulled out of cabinet
- Pans up to 6 in. deep fit inside drawers
- Painted aluminum handles are durable
Elite Series Sandwich Top Refrigerated Counter, two-section, 60″W, 12.2 cu. ft., (4) drawers (upper & lower pull-out drawers accommodate 6″ deep pans), stainless steel top with opening for (12) 1/6 size pans (pans furnished are 4″ deep, tops will accommodate 6″ deep pans), 17″ polyethylene cutting board, stainless steel exterior, aluminum interior, rear-mounted self-contained refrigeration, R290 Hydrocarbon refrigerant, 1/4 HP, UL, cUL, UL EPH, MADE IN USA, 115v/60/1ph
Note: Nominal cubic footage measurements sometimes provided by refrigeration manufacturers may not indicate actual usable space. If you require a specific capacity, please call one of our customer care representatives to ensure the unit you order meets your needs.